Rainwater downpipe
A rainwater downpipe is a pipe that is used to direct rainwater away from a building, typically from roof guttering to a drainage system. It is sometimes also referred to as a downspout, drain spout, roof drain pipe or leader.
The Building Regulation’s part H, Drainage and water disposal, requires that adequate provision is made for rainwater to be carried from the roof of buildings. Approved document H suggests that to achieve this, roofs should be designed with a suitable fall towards either a surface water collection channel or gutter that surface water to vertical rainwater downpipes, which in turn connect the discharge to the drainage system.
A downpipe is typically vertical and extends to ground level. They are most commonly found attached to the corners of a building. The discharge from a downpipe can be:
- Directly connected to a drain discharging into a soakaway.
- Directly connected to a drain discharging into a surface water sewer.
- Indirectly connected to a drain via a trapped gully if the drain discharges into a combined sewer.
Traditionally, rainwater downpipes were made using cast iron, although uPVC systems are increasingly common due to ease of installation and low maintenance requirements. As long as adequate size, strength and durability can be assured, they can also be made of aluminium alloy, galvanised steel, stainless steel, and so on.
Downpipes have a tendency to become blocked when debris such as leaves and twigs accumulate. To prevent this, they should be properly maintained, and are usually attached to a building using brackets which can be easily removed for cleaning if necessary.
The size and number of rainwater downpipes required will depend on the intensity of rainfall that is likely and the area of the surface to be drained. A number of online calculators are available to help determine the required size and number of rainwater downpipes.
Rainwater downpipes are most commonly round in section, but may be any shape. They typically have a diameter ranging from 50 - 150 mm, but any size can be used. They may include access panels for inspection or rodding, branch connectors, bends, hoppers and leaf guards at the top, diverters, rainwater harvesting systems, angled shoes at the bottom, and so on.
[edit] Related articles on Designing Buildings Wiki
- All eyes up to plastic rainwater systems.
- Approved Document H.
- Correct way to fix lead guttering.
- Culvert.
- Drainage.
- Drainage stack.
- Drains.
- Groundwater control in urban areas.
- Rainwater.
- Rainwater goods.
- Rain gutter.
- Rainwater harvesting.
- Rainwater head.
- Safe working in drains and sewers.
- Sanitary pipework.
- Sewer construction.
- Soakaway.
- Soil vent pipe.
Featured articles and news
Private rental sector, living standards and fuel poverty
Report from the NRH in partnership with Impact on Urban Health.
.Cold chain condensing units market update
Tracking the evolution of commercial refrigeration unit markets.
Attending a conservation training course, personal account
The benefits of further learning for professsionals.
Restoring Alexander Pope's grotto
The only surviving part of his villa in Twickenham.
International Women's Day 8 March, 2025
Accelerating Action for For ALL Women and Girls: Rights. Equality. Empowerment.
Lack of construction careers advice threatens housing targets
CIOB warning on Government plans to accelerate housebuilding and development.
Shelter from the storm in Ukraine
Ukraine’s architects paving the path to recovery.
BSRIA market intelligence division key appointment
Lisa Wiltshire to lead rapidly growing Market Intelligence division.
A blueprint for construction’s sustainability efforts
Practical steps to achieve the United Nations Sustainable Development Goals.
Timber in Construction Roadmap
Ambitious plans from the Government to increase the use of timber in construction.
ECA digital series unveils road to net-zero.
Retrofit and Decarbonisation framework N9 launched
Aligned with LHCPG social value strategy and the Gold Standard.
Competence framework for sustainability
In the built environment launched by CIC and the Edge.
Institute of Roofing members welcomed into CIOB
IoR members transition to CIOB membership based on individual expertise and qualifications.
Join the Building Safety Linkedin group to stay up-to-date and join the debate.
Government responds to the final Grenfell Inquiry report
A with a brief summary with reactions to their response.